Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the rear taillight on a Mercedes GLC?

Model: Mercedes Glc C253, X253, MK 1 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Tail light

See other generations:
Video tutorial

To remove the rear light of a Mercedes GLC, start by opening the tailgate and locating the bolts that secure the light. Use a wrench or a screwdriver to unscrew them.

Then, carefully remove the plastic cover that covers the back part of the light. At this point, you should see the electrical connectors: gently disconnect the wiring connector of the light.

Finally, remove the light itself, being careful not to damage the mounting clips. If the light resists, it may be helpful to use a small screwdriver to pry it out, but always with caution.


Posted on 28 September 2025 by ScegliAuto


Related tutorials

How to replace the rear lights of the Mercedes GLC
How to replace the rear lights of the Mercedes GLC
Mercedes Glc (2015-2022 / C253, X253, MK 1) In this guide we will see the instructions that will allow us to disassemble and replace the rear lights and its bulbs of the Mercedes GLC. First, op…
How to Install Side Steps on a Mercedes GLC
How to Install Side Steps on a Mercedes GLC
Mercedes Glc (2015-2022 / C253, X253, MK 1) Start by removing the clips that secure the plastic door sills on your Mercedes GLC, then remove the corresponding lower bolts. Once done, open the d…
How to replace the windshield wipers of the Mercedes GLC 2
How to replace the windshield wipers of the Mercedes GLC 2
Mercedes Glc (2022-2026 / X254, C254, MK 2) To complete the procedure that allows you to independently replace the windshield wipers of your second edition Mercedes GLC, simply follow these ste…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos