Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear lights of the Mercedes GLC

Model: Mercedes Glc C253, X253, MK 1 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Tail light

See other generations:
Video tutorial

In this guide we will see the instructions that will allow us to disassemble and replace the rear lights and its bulbs of the Mercedes GLC. First, open the rear tailgate of the trunk and start removing the side plastic cover located on the inside; then unscrew the screws of the headlight and disconnect the electrical connector of the bulbs to remove it, as shown in the video.

At this point it will be possible to replace only the stop bulbs, or replace the entire rear light; reassemble and properly fix the headlight on the body.


Posted on 13 November 2025 by ScegliAuto


Related tutorials

How to replace the windshield wipers of the Mercedes GLC 2
How to replace the windshield wipers of the Mercedes GLC 2
Mercedes Glc (2022-2026 / X254, C254, MK 2) To complete the procedure that allows you to independently replace the windshield wipers of your second edition Mercedes GLC, simply follow these ste…
How to Install Side Steps on a Mercedes GLC
How to Install Side Steps on a Mercedes GLC
Mercedes Glc (2015-2022 / C253, X253, MK 1) Start by removing the clips that secure the plastic door sills on your Mercedes GLC, then remove the corresponding lower bolts. Once done, open the d…
How to replace the cabin air filter of the Mercedes GLC 300
How to replace the cabin air filter of the Mercedes GLC 300
Mercedes Glc (2015-2022 / C253, X253, MK 1) In this new guide aimed at all of you who own a Mercedes GLC 300, we will explain the steps you need to take to replace the cabin air filter yourself…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos