Do it yourself
Frequently asked questions about cars and motorcycles

How to enter brake pad service mode on a Mercedes E-Class W213

Model: Mercedes Classe E W213 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Brake system

See other generations:
Video tutorial

Let's see how to enter brake pad service mode on a Mercedes E-Class W213: Insert the key and turn it to position 1, without starting the engine. The handbrake must be disengaged.

Press the "ok" button on the steering wheel; at the same time, press the "back" button (a left arrow) and hold both buttons down for about ten seconds, until a service or diagnostic screen appears on the instrument cluster. Use the directional buttons to find the option called "brake pad service" or "wear indicator". Confirm with "ok" and you will hear a slight noise from the electric motors in the rear wheels: this is the signal that the parking brake actuator has retracted to service position.

After completing the work, return to the menu on the instrument cluster, go back to the option you selected and press "ok" again. You will hear the noise of the actuators repositioning.


Posted on 14 October 2025 by ScegliAuto


Related tutorials

Mercedes Classe E (2016-2023 / W213) .. the rear brake service mode on the Mercedes E-Class W213 with electronic handbrake. Turn on the instrument panel, press the handbrake button to release.. …
Mercedes Classe E (2016-2023 / W213) Today, let's go through the main steps to remove and replace the rear brake pads on the Mercedes E-Class. First, position the rear brake calipers in …
Mercedes Classe E (2016-2023 / W213) .. that contains all the fuses for your Mercedes E-Class W213 is very simple, and you just need to follow the steps described in this guide. First, open.. …

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos