Do it yourself
Frequently asked questions about cars and motorcycles

How do you reset the Service indicator light on the Mercedes C-Class?

Model: Mercedes Classe C W206 - Years: 2021, 2022, 2023, 2024, 2025, 2026
Part: Service warning light

See other generations:
Video tutorial

It will be possible to make the Service light disappear from the instrument panel of the Mercedes C-Class by holding down the button to access the menu located on the right side of the steering wheel. Once the menu is displayed on the instrument panel, you will need to select the "ASSYST PLUS" option, then proceed by selecting "Full service" and then select "Confirm service". In this way, you will notice that the light will completely disappear from the instrument panel; by turning off and on the instrument panel, you can verify that the operation has been carried out correctly.


Posted on 25 October 2025 by ScegliAuto


Related tutorials

Mercedes Classe C (2014-2021 / W205) .. the maintenance reminder on a Mercedes-Benz C-Class, access the instrument cluster and press the "back" button on the steering wheel to enter the odometer.. …
Mercedes Classe C (2014-2021 / W205) .. to the car maintenance on a 2019 Mercedes C-Class vehicle, we need to turn on the instrument panel and simultaneously press the "OK" and "CALL" buttons.. …
Mercedes Classe C (2014-2021 / W205) .. of the engine oil change on the Mercedes C-Class. First, get inside the vehicle and turn on the ignition by pressing the start button. Next, press.. …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to adjust the headlights in the Toyota RAV4?

In this tutorial, you can see how to adjust the headlights in the Toyota RAV4, a very simple and quick operation. First, position the vehicle in front of a wall, about 40 centimetres away, then switch on the headlights and open the bonnet. Next, locate the small hole on both headlamps, apply tape on the wall at the same height, and using the indicated adjustment ring, position the beam of light so that it is perpendicular to the tape. Finally, move the vehicle back and check that the beam falls below the tape; if not, lower it slightly.

Watch the video!


by ScegliAuto

More videos