|
Do it yourself
| |||
| ||||
How do you reset the Service light on a Mercedes C-Class?
Model: Mercedes Classe C
W204
- Years:
2007, 2008, 2009, 2010, 2011, 2012, 2013
Video tutorial
The Service light displayed on the instrument panel of the Mercedes Classe C can be completely turned off by navigating through the menu shown on the instrument panel using the buttons located on the left side of the steering wheel. Once the option showing the kilometers remaining until the next service appears, you need to press and hold the buttons at the bottom on the left side and the one at the top on the right side. This will reset the Service light, and you can turn off the instrument panel by removing the key. You can also verify that the reset was successful by turning the panel back on with the key.
Posted on 31 December 2025 by ScegliAuto
Related tutorials
Mercedes Classe C
(1993-2000 /
W202)
.. To reset the Service light on the Mercedes C-Class, press and hold the ZERO button located on the left side of the instrument cluster while the cluster.. …
Mercedes Classe C
(2007-2013 /
W204)
.. To reset the Service light on a Mercedes C-Class, turn the key to the "On" position to activate the instrument cluster. Then, press and hold the.. …
Mercedes Classe C
(2007-2013 /
W204)
.. On the Mercedes C-Class, reset the Service light by turning the key to the "On" position. Then, press and hold the OK button.. …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
How to adjust the headlights in the Toyota RAV4?
In this tutorial, you can see how to adjust the headlights in the Toyota RAV4, a very simple and quick operation. First, position the vehicle in front of a wall, about 40 centimetres away, then switch on the headlights and open the bonnet. Next, locate the small hole on both headlamps, apply tape on the wall at the same height, and using the indicated adjustment ring, position the beam of light so that it is perpendicular to the tape. Finally, move the vehicle back and check that the beam falls below the tape; if not, lower it slightly. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.076
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |