Do it yourself
Frequently asked questions about cars and motorcycles

How do you reset the service indicator on the Mercedes Class C?

Model: Mercedes Classe C W205 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Service warning light

See other generations:
Video tutorial

The service indicator for the Mercedes C-Class can be reset directly by us drivers, as an alternative to what happens in the workshop using professional diagnostic equipment connected via cable to the vehicle. We have a tutorial video here that shows both how to turn off this indicator and what periodic and routine maintenance tasks need to be performed related to the service.

The procedure is as follows: turn on the instrument panel, select the General Maintenance option, which can be found using the steering wheel's Arrow buttons, and then authorize the proposed Reset, thus also setting the next mileage deadline.


Posted on 15 January 2026 by ScegliAuto


Related tutorials

Mercedes Classe C (2007-2013 / W204) In a few simple steps, we will see how to reset the service indicator light for the oil change of the Mercedes C-Class. First, get into the car and t…
Mercedes Classe C (2000-2007 / W203) The instructions in this guide will show us how to reset the service indicator of the Mercedes C-Class. First, we get into the car and start the inst…
Mercedes Classe C (2007-2013 / W204) In this tutorial, we will see how to reset the service indicator on the Mercedes C-Class, an operation that is extremely simple and quick, to be perf…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to adjust the headlights in the Toyota RAV4?

In this tutorial, you can see how to adjust the headlights in the Toyota RAV4, a very simple and quick operation. First, position the vehicle in front of a wall, about 40 centimetres away, then switch on the headlights and open the bonnet. Next, locate the small hole on both headlamps, apply tape on the wall at the same height, and using the indicated adjustment ring, position the beam of light so that it is perpendicular to the tape. Finally, move the vehicle back and check that the beam falls below the tape; if not, lower it slightly.

Watch the video!


by ScegliAuto

More videos