Do it yourself
Frequently asked questions about cars and motorcycles

How do you reset the Service light on a Mercedes Class C?

Model: Mercedes Classe C W203 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Service warning light

See other generations:
Video tutorial

To completely reset the Service light displayed on the instrument panel of the Mercedes C-Class, you need to perform the following operations: insert the ignition key into the corresponding slot to activate the dashboard. Next, press the button located at the bottom left side of the steering wheel twice.

You need to reach the maintenance screen: then press and hold the reset button until it is reset. After that, turn the instrument panel back on and check that the service indicator is reset.


Posted on 18 January 2026 by ScegliAuto


Related tutorials

Mercedes Classe C (2014-2021 / W205) To reset the service light for the maintenance reminder on a Mercedes-Benz C-Class, access the instrument cluster and press the "back" button on the …
Mercedes Classe C (2014-2021 / W205) To reset the service light related to the car maintenance on a 2019 Mercedes C-Class vehicle, we need to turn on the instrument panel and simultaneou…
Mercedes Classe C (2014-2021 / W205) Today, let's go through the procedure to reset the service light for the regular maintenance of the engine oil change on the Mercedes C-Class. First,…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

How to adjust the headlights in the Toyota RAV4?

In this tutorial, you can see how to adjust the headlights in the Toyota RAV4, a very simple and quick operation. First, position the vehicle in front of a wall, about 40 centimetres away, then switch on the headlights and open the bonnet. Next, locate the small hole on both headlamps, apply tape on the wall at the same height, and using the indicated adjustment ring, position the beam of light so that it is perpendicular to the tape. Finally, move the vehicle back and check that the beam falls below the tape; if not, lower it slightly.

Watch the video!


by ScegliAuto

More videos