Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel of the Mercedes W203

Model: Mercedes Classe C W203 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Door trim panel

See other generations:
Video tutorial

This article shows you how to remove the door panel of the Mercedes C-Class W203. You will need a T25 Torx screwdriver and a flathead screwdriver for this operation. First, remove the front part of the handle by prying at the bottom of the handle.

Once the cover is removed, take out the 2 screws using the T25 Torx screwdriver. After removing the 2 screws, also remove the screw located on the side of the door as shown in the video tutorial.

Then, use a plastic trim tool or the flathead screwdriver to pry and pull the trim towards you. At this point, also remove the upper plastic piece and disconnect the connector. Once the upper part is removed, take off the panel, being careful with the connectors.

Disconnect the connectors and completely remove the door panel. Now the procedure is complete.


Posted on 5 February 2026 by ScegliAuto


Related tutorials

Removing the Driver Side Door Handle on Mercedes C-Class W203
Removing the Driver Side Door Handle on Mercedes C-Class W203
Mercedes Classe C (2000-2007 / W203) In today's video, you will learn how to remove the outer door handle on the driver side of a Mercedes Benz C-Class W203. First, open the front door a…
Instructions for Removing the Door Lock on Mercedes C-Class W203
Instructions for Removing the Door Lock on Mercedes C-Class W203
Mercedes Classe C (2000-2007 / W203) In this brief guide, you will find instructions to remove and replace the door lock mechanism on the front door of a Mercedes C-Class W203. First, op…
Replacing the Window Switch Panel on a Mercedes C-Class W203
Replacing the Window Switch Panel on a Mercedes C-Class W203
Mercedes Classe C (2000-2007 / W203) In this video tutorial, you will learn how to remove and replace the window switch panel on a Mercedes C-Class W203, third generation. First, open th…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos