Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Maintenance Light on the Mercedes GLC

Model: Mercedes Glc X254, C254, MK 2 - Years: 2022, 2023, 2024, 2025, 2026
Part: Service warning light

See other generations:
Video tutorial

This guide explains how to reset the service light for the regular maintenance oil change on the Mercedes GLC. First, get inside the vehicle and turn on the ignition. Then, navigate to the onboard computer settings using the buttons on the steering wheel, and select "assyst plus," followed by "full service," as shown in the video.

At this point, register the maintenance service in the history, thereby resetting the service warning on the instrument panel.


Posted on 16 February 2026 by ScegliAuto


Related tutorials

How to Reset the Maintenance Light of the 2022 Mercedes GLC
How to Reset the Maintenance Light of the 2022 Mercedes GLC
Mercedes Glc (2015-2022 / C253, X253, MK 1) In today's article, you will see how to reset the maintenance light of the 2022 Mercedes GLC. Remember to perform the reset only after completing the…
How to Install Side Steps on a Mercedes GLC
How to Install Side Steps on a Mercedes GLC
Mercedes Glc (2015-2022 / C253, X253, MK 1) Start by removing the clips that secure the plastic door sills on your Mercedes GLC, then remove the corresponding lower bolts. Once done, open the d…
How to Reset the "Service" Light on a Mercedes GLC?
How to Reset the "Service" Light on a Mercedes GLC?
Mercedes Glc (2015-2022 / C253, X253, MK 1) To reset the "Service" light on a Mercedes GLC, start by turning on the instrument cluster without starting the engine. Use the buttons on the steeri…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos