Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a 2022 Mercedes GLE

Model: Mercedes Gle V167 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Service warning light

See other generations:
Video tutorial

Let's see how to reset the service light on a 2022 Mercedes GLE: turn on the ignition, then press and hold the "back" and "ok" buttons simultaneously for about 5 seconds. Release the button: this will take you into "workshop" mode.

Scroll down to select "assyst plus"; select "full service" and confirm "service". You will be asked to confirm the type of oil you used. For "service performed," respond by selecting "yes," then scroll and select "confirm." The message should disappear at this point.

Verify by starting the engine to check that the light has turned off.


Posted on 20 February 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on the Mercedes GLE?
How to Reset the Service Light on the Mercedes GLE?
Mercedes Gle (2019-2026 / V167) To reset the Service light on the Mercedes GLE, turn on the ignition and navigate through the menu using the steering wheel controls. Select the wren…
How to Reset the Service Light on a Mercedes GLE?
How to Reset the Service Light on a Mercedes GLE?
Mercedes Gle (2019-2026 / V167) To reset the Service light on a Mercedes GLE, turn on the ignition by inserting the key into the ignition switch. Navigate to the menu that appears: …
How to Reset the Service Light on the Mercedes GLE?
How to Reset the Service Light on the Mercedes GLE?
Mercedes Gle (2019-2026 / V167) After performing maintenance on your Mercedes GLE, including an oil change and everything specified by the manufacturer, and reaching the required mi…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos