Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Warning on the Mercedes C-Class

Model: Mercedes Classe C W205 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Service warning light

See other generations:
Video tutorial

These simple steps will show you how to reset the service warning on the Mercedes C-Class. First, get in the vehicle and turn on the ignition; then press the two buttons on the steering wheel to enter the service menu, selecting "assyst plus" and then "full service," as shown in the video.

At this point, register the new maintenance interval by entering the mileage; this will reset the service light on the instrument cluster, and finally exit the settings.


Posted on 22 March 2026 by ScegliAuto


Related tutorials

Mercedes Classe C (2000-2007 / W203) .. the maintenance warning for the Mercedes-Benz C-Class. First, get inside the vehicle and turn on the ignition; then navigate to the service menu by pressing.. …
Mercedes Classe C (2007-2013 / W204) .. for the engine oil change of the Mercedes C-Class. First, let's get inside the vehicle and turn on the ignition; then we access the settings of the.. …
Mercedes Classe C (2007-2013 / W204) .. regular maintenance reminder for the Mercedes C-Class. First, get inside the vehicle and turn on the ignition; then press and hold the "ok" button and.. …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

How to adjust the headlights in the Toyota RAV4?

In this tutorial, you can see how to adjust the headlights in the Toyota RAV4, a very simple and quick operation. First, position the vehicle in front of a wall, about 40 centimetres away, then switch on the headlights and open the bonnet. Next, locate the small hole on both headlamps, apply tape on the wall at the same height, and using the indicated adjustment ring, position the beam of light so that it is perpendicular to the tape. Finally, move the vehicle back and check that the beam falls below the tape; if not, lower it slightly.

Watch the video!


by ScegliAuto

More videos