Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Mercedes S-Class?

Model: Mercedes Classe S MK 6, W222 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Fuse box

See other generations:
Video tutorial

Insert the ignition key into the ignition switch to activate the instrument cluster. Then, press and hold the OK button and the button for answering calls on the side spokes of the steering wheel.

This will start the reset process for the Service light on the Mercedes S-Class. While holding these buttons, a menu will appear, allowing you to navigate using the steering wheel controls.

Select "ASSYST PLUS", then choose "Full service" and "Conf. Full service". Once the confirmation message appears, select "Yes" and turn off the display to complete the process.


Posted on 27 April 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Mercedes S-Class?
How to Reset the Service Light on a Mercedes S-Class?
Mercedes Classe S (2005-2013 / W221, MK 5) .. on the instrument cluster of the Mercedes S-Class by turning the key in the ignition switch: once it is on, press and hold the OK button and the.. …
How to Reset the Service Light on the Mercedes S-Class
How to Reset the Service Light on the Mercedes S-Class
Mercedes Classe S (2005-2013 / W221, MK 5) .. The Mercedes S-Class model W221 follows the same steps used by other Mercedes models to reset the service light. The.. …
Resetting the Service Light on the Mercedes S-Class
Resetting the Service Light on the Mercedes S-Class
Mercedes Classe S (2005-2013 / W221, MK 5) .. regular maintenance oil change on the Mercedes S-Class. First, get in the vehicle and turn on the ignition; then use the steering wheel controls to access.. …

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos