Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change Windshield Wiper Blades on a Mercedes C-Class

Model: Mercedes Classe C W203 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Windshield wipers

See other generations:
Video tutorial

To replace the wiper blades on a Mercedes-Benz C-Class, turn off the vehicle and lift the wiper arm away from the windshield until it is in a vertical position. Locate the attachment point between the arm and the blade.

Press the release tab on the connector and slide the blade downward to remove it from the arm's hook. Take the new blade and insert it into the same connector, sliding it until you hear a click that indicates it is securely locked.

Slowly lower the arm back onto the windshield without letting it drop. Repeat the same process for the other wiper, ensuring both blades are securely attached.


Posted on 29 April 2026 by ScegliAuto


Related tutorials

How to replace the windshield wiper blades of the Mercedes C-Class
How to replace the windshield wiper blades of the Mercedes C-Class
Mercedes Classe C (2014-2021 / W205) .. the windshield wiper blades of the Mercedes C-Class model W 205, we need to lift the wiper arm to position it vertically. Press on the pin located.. …
Windshield Wiper Blade Replacement
Windshield Wiper Blade Replacement
Mercedes Classe C (2007-2013 / W204) With the arrival of autumn and winter, the need for fully efficient windshield wiper blades increases. Therefore, check the condition of the rubber, …
Replacing Windshield Wipers on Mercedes C-Class
Replacing Windshield Wipers on Mercedes C-Class
Mercedes Classe C (2000-2007 / W203) .. to replace the windshield wipers on a Mercedes C-Class. First, lift the wiper arm away from the windshield. Then, remove the wiper blade from its arm... …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos