Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe C
    4. : Replacement wiper blades

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W204 - Years 2007-2013
Part: Windscreen wipers
Operation: Replacement wiper blades

With the arrival of autumn and the winter season, the need to have perfectly efficient wiper blades increases, therefore it is advisable to check the condition of the rubber and if you notice cracks it is certainly advisable to replace it; it is suggested to choose a quality product that guarantees perfect drying of the windshield without leaving streaks or wet areas that could compromise visibility; once the new brushes have been chosen, checking the length (usually the driver's side brush is longer) and the type of attachment, lift the control arm, rotate the brush about 90 degrees and release it to be able to insert the new one.


Posted on 2 September 2023 by ScegliAuto

    Frequently Asked Questions

    • Classe C 2014-2021 - What to do when the windshield wiper of the Mercedes C-Class is not working? Read Answer
    • Classe C 2014-2021 - What is the windshield fuse on Mercedes C-Class? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos