Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install a Rearview Camera in Cars?

Model: Mercedes Classe A W169 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Accessory kit

See other generations:
Video tutorial

Installing a rearview camera on a vehicle to assist during reverse maneuvers is not a very complex task, as shown in this tutorial video. This example is done on a Mercedes A-Class W169, but the process is similar for other vehicles.

After installing the camera by drilling in the license plate area of the rear hatch, run the power cables under the trim panel of the hatch, then under the roof trim or door seals, and finally reach the dashboard, where you will make the connections at the back of the display.


Posted on 28 May 2026 by ScegliAuto


Related tutorials

How to Install a Front Dash Cam on the Mercedes A-Class
How to Install a Front Dash Cam on the Mercedes A-Class
Mercedes Classe A (2012-2018 / W176) In this guide, you will find instructions to install a front dash cam on the Mercedes A-Class. First, obtain a dash cam suitable for your vehicle. Po…
Fuse Diagram for the A-Class 180 CDI
Fuse Diagram for the A-Class 180 CDI
Mercedes Classe A (2018-2026 / W177) The fuse box is located on the floor under the upholstery in front of the passenger seat. The diagram is as follows: 21 Valid for diesel engine: PTC …
How to Replace the Cabin Air Filter in Your Car
How to Replace the Cabin Air Filter in Your Car
Mercedes Classe A (1997-2004 / W168) Changing the cabin air filter in your car is very important because it protects against external agents entering the cabin and helps the ventilation …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos