Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Mercedes Sprinter W639

Model: Mercedes Viano MK 1, W639 - Years 2003-2013
Part: Service warning light

In this guide, you will find the entire procedure to correctly reset the service light on your Mercedes Viano W639. First, insert the key and turn it to the second position, then focus on the buttons located on the left side of the steering wheel. At this point, press the left button several times until the display shows the total mileage. Next, scroll up until the service light appears, and hold down the button located to the left of the rev counter. After a few seconds, release the button and press the one on the right. Then scroll up again, find the service light, and select it. Finally, click on the type of oil used and complete the reset of the light.

Posted on 4 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuse box of the Mercedes Viano W639?
Where is the fuse box of the Mercedes Viano W639?
Mercedes Viano (2003-2013 / MK 1, W639) The fuse box of your Mercedes Viano W639 (2003-2013) is located inside the cabin. With this dedicated guide, you will finally be able to locate it wi…
How do you reset the Service light on a Mercedes Viano?
How do you reset the Service light on a Mercedes Viano?
Mercedes Viano (2003-2013 / MK 1, W639) From the instrument panel of the Mercedes Viano, you can reset the Service light by activating the instrument panel and turning the key in the corres…
Replacing the Rear Suspension on a Mercedes Viano W639
Replacing the Rear Suspension on a Mercedes Viano W639
Mercedes Viano (2003-2013 / MK 1, W639) In this video tutorial, follow step-by-step instructions to remove and replace the rear suspension on a Mercedes Viano W639. First, lift the vehicle …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos