Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Car Radio from a Mercedes CLS

Model: Mercedes Classe E W211 - Years 2002-2009
Part: Car stereo

To remove the car radio from a Mercedes CLS, first extract the control panel that houses the hazard light switch located below the radio. This will be secured to the dashboard with two screws at the bottom, and to access them, simply remove the ashtray. To remove the ashtray more easily, you can detach the cover of the gear shift by pulling it upward with some force. Once the ashtray is removed, you will have access to the two screws of the control panel, which can then be unscrewed. After unscrewing the screws, disconnect the three power connectors attached to the control panel, and you can then proceed to pull it out from the dashboard. Once the control panel is removed, you will have access to two more screws located under the radio. These screws secure the radio to the dashboard and must be removed to extract it. After removing the radio, you can replace it with a new one, ensuring you have all the necessary modifications if you plan to install an aftermarket radio. Then, after installing the new radio, simply reassemble everything in the reverse order of disassembly.

Updated on 11 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Mercedes Classe E (1995-2002 / W210) To reset the radio of the Mercedes E-Class, first you need to find the radio unlock code. The first step to perform the reset is to turn on the instr…
Mercedes Classe E (2002-2009 / W211) If the volume knob of the car radio and the CD player do not work, there is an electronic issue inside the car radio: to perform this repair, you nee…
Mercedes Classe E (2002-2009 / W211) It will be possible to reset the Mercedes E-Class car radio by removing and reinserting the corresponding fuse from its slot: to do this, you will ne…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos