Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Wheel Bearing on the Mercedes M-Class

Model: Mercedes Classe M W163 - Years 1997-2005
Part: Bearing

In this guide, you will find instructions to help you remove and replace the rear wheel bearing on the Mercedes M-Class. First, lift the vehicle and start by removing the rear wheel; then undo the screws of the drum to remove it, followed by the brake shoes, as shown in the video. At this point, disconnect the rear driveshaft, allowing you to remove the bearing using a puller; install the new wheel bearing and reassemble the braking system, replacing the brake shoes if necessary.

Posted on 6 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Position Light Bulb on the Mercedes M-Class?
How to Replace the Position Light Bulb on the Mercedes M-Class?
Mercedes Classe M (2005-2011 / W164) .. the position light bulb on the Mercedes M-Class, open the bonnet to access the internal components of the front headlamp: here you will find the.. …
Where are the fuses located in the Mercedes M-Class?
Where are the fuses located in the Mercedes M-Class?
Mercedes Classe M (1997-2005 / W163) .. Each of the fuses in the Mercedes Classe M will be located inside one of the fuse boxes installed in the vehicle: in this car model, there.. …
How to Replace the Climate Control Unit on the Mercedes M-Class?
How to Replace the Climate Control Unit on the Mercedes M-Class?
Mercedes Classe M (2005-2011 / W164) .. the climate control unit on the Mercedes M-Class, open the ashtray located directly under the climate control commands. After opening it, unscrew.. …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos