Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Reset Engine Oil (Service) Light for Mercedes E-Class

Model: Mercedes Classe E W211 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Service warning light

See other generations:
Video tutorial

Today, let's go through the steps and main instructions to reset the service light for routine maintenance on the Mercedes E-Class. First, get in the vehicle and turn on the ignition; navigate to the battery voltage display, then access the service menu as shown in the video.

At this point, press and hold the reset button located at the bottom left of the instrument cluster, confirming and executing the reset of the key and maintenance light that appears on the instrument cluster display!


Posted on 12 October 2026 by ScegliAuto


Related tutorials

Reset the Service Light on the Mercedes E-Class
Reset the Service Light on the Mercedes E-Class
Mercedes Classe E (2016-2023 / W213) .. routine maintenance oil change on the Mercedes E-Class. First, get inside the vehicle and turn on the ignition; then access the onboard computer menu.. …
How to Reset the Maintenance Light on a Mercedes E-Class
How to Reset the Maintenance Light on a Mercedes E-Class
Mercedes Classe E (2009-2016 / W212) .. light for the engine oil change on a Mercedes E-Class. First, get in the vehicle and turn on the ignition; then navigate to the settings menu on the.. …
How to reset the service light on the Mercedes E-Class.
How to reset the service light on the Mercedes E-Class.
Mercedes Classe E (1995-2002 / W210) .. for resetting the warning on the Mercedes E-Class. First, we get inside the vehicle and start by pressing the lower left button twice, then turning.. …

Other guides you may be interested in

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos