Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe S
    4. : How to remove and refit the metal emblem of a Mercedes E-Class car

Mercedes Classe S - Video tutorial

Model: Mercedes Classe S MK 4, W220 - Years 1999-2005
Part: Manufacturer's coat of arms
Operation: How to remove and refit the metal emblem of a Mercedes E-Class car

Let's see in this video how the metal emblem of a Mercedes E-Class car placed in the front hood can be removed and reassembled. We lift the front engine hood and with a wrench we unscrew the nut that tightens the metal stop (we release the piece by rotating it with the pliers). Once the metal piece has been detached, remove it from its seat and get ready to mount the new logo. We position the emblem perfectly in the hole above the hood; push with your hands until the emblem fits perfectly into the logo holder (fasten with a special lower metal). Finally we check if we have assembled everything perfectly.


Posted on 23 November 2023 by ScegliAuto



How to replace the dead battery on a Mercedes S-Class remote control key
Mercedes Classe S (2005-2013 / MK 5, W221) Let's see how to change the low battery on a Mercedes S-Class remote control key. Take our ignition remote control and extract the metal key. Once th
Sun visor repair on Mercedes S-Class W220
Mercedes Classe S (1999-2005 / MK 4, W220) In today's video we will see how to remove and repair the sun visor on a Mercedes S-Class W220; this procedure can be applied to most vehicles on the
How to replace the turn signal in the rear view mirror of a Mercedes S-Class
Mercedes Classe S (1999-2005 / MK 4, W220) Let's see in this video how to remove and replace the direction indicator placed in the rearview mirror of a Mercedes S-Class. Very simple operation.

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos