Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Repairing Sun Visor on Mercedes S-Class W220

Model: Mercedes Classe S MK 4, W220 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005

See other generations:
Video tutorial

In today's video, you will learn how to remove and repair the sun visor on a Mercedes S-Class W220; this procedure can be applied to most vehicles on the market. Start by removing the sun visor; get inside the car and use a plastic trim tool to take off the plastic cover of the bracket, allowing you to unscrew the mounting screws underneath.

At this point, remove the sun visor and pull out the internal metal rod; then apply silicone paste and reinsert the rod back into the visor. Finally, reinstall it and check its functionality!


Updated on 8 April 2026 by ScegliAuto


Related tutorials

How to disassemble the sun visor of the Mercedes S-Class
How to disassemble the sun visor of the Mercedes S-Class
Mercedes Classe S (1999-2005 / MK 4, W220) Today we will see the instructions that will allow us to disassemble and replace the sun visor of the Mercedes S-Class. First, we get on board the ca…
How to Replace the Sun Visor on a Mercedes S-Class?
How to Replace the Sun Visor on a Mercedes S-Class?
Mercedes Classe S (1999-2005 / MK 4, W220) To replace the sun visor on a Mercedes S-Class, use a screwdriver to pry off the cover located at the external support of the visor: beneath this cov…
Replacing Crankshaft Sensor on Mercedes S-Class W220
Replacing Crankshaft Sensor on Mercedes S-Class W220
Mercedes Classe S (1999-2005 / MK 4, W220) .. Replace the crankshaft sensor on the Mercedes S-Class W220 (and W210) is really simple. Lift the hood and use the prop rod. It is located in the engine.. …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos