Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Access the Battery on a Mercedes A-Class

Model: Mercedes Classe A W169 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Battery

See other generations:
Video tutorial

How do you perform maintenance on a Mercedes A-Class? This video explains how to access the battery. Open the panel located under the floor (passenger side); lift the panel and set it aside.

Once the compartment is open, you will find the power battery and all the fuses necessary for the vehicle's operation. Remove the plastic cover and check the integrity of the battery and if the terminals are securely tightened.

Replace the battery (if damaged) and the fuses. Close the battery compartment after maintenance.

Test the vehicle's proper operation.


Updated on 13 March 2026 by ScegliAuto


Related tutorials

How to Change the Key Fob Battery on the Mercedes A-Class W169 - C-Class W204
How to Change the Key Fob Battery on the Mercedes A-Class W169 - C-Class W204
Mercedes Classe A (2004-2012 / W169) .. the battery in the key fob for the Mercedes A-Class W169, as well as the B-Class W246 and C-Class W204. First, take your key fob and remove the physical.. …
Change the Remote Battery on the Mercedes A-Class W169
Change the Remote Battery on the Mercedes A-Class W169
Mercedes Classe A (2004-2012 / W169) .. the battery in the key remote for the Mercedes A-Class W169, as well as the C-Class and B-Class. First, take your remote and remove the physical key from.. …
Guide to Removing the Battery from the Mercedes A-Class
Guide to Removing the Battery from the Mercedes A-Class
Mercedes Classe A (1997-2004 / W168) .. remove and replace the battery in the Mercedes A-Class. First, open the front passenger door and start by removing the floor mat; then unscrew the plastic.. …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos