Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset and Reprogram the Service on a Toyota RAV4

Model: Mercedes Classe C W203 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Warning light – error code

See other generations:
Video tutorial

In this video, see how to reset and reprogram the service on a Toyota RAV4. Turn on the instrument cluster with the appropriate remote key; press the button located near the steering wheel (right side) until you find the message. Press the button next to the instrument cluster until the maintenance reset service message appears, and read the new service message.

Turn off and turn on the instrument cluster again with the key; the maintenance completion message will appear with the mileage. Double-check everything and turn off the instrument cluster after setting it up.


Updated on 13 March 2026 by ScegliAuto


Related tutorials

Mercedes Classe C (2007-2013 / W204) In this short guide, you will learn how to reset the regular maintenance reminder for the Mercedes C-Class. First, get inside the vehicle and turn on…
Mercedes Classe C (2007-2013 / W204) This video shows how to reset the service light on your Mercedes C-Class. Turn on the ignition with the key fob, press the buttons located near the s…
Mercedes Classe C (2007-2013 / W204) In the following article, we will explain the procedure for resetting the automatic transmission of the Mercedes C-Class W204 in case it becomes stuc…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

    Frequently Asked Questions

    • Classe C 2000-2007 - Why did the "SRS" warning light come on in the Mercedes C-Class? Read answer

Where is the battery located on the Aprilia Scarabeo 250ie scooter?

This video shows where the battery is located on the Aprilia Scarabeo 250ie scooter and how to proceed if you need to replace it. As shown, it is located beneath the seat. To access and replace it, first open the seat, then remove the plastic cover by unscrewing the relevant screws with a cross-head screwdriver. Next, disconnect both terminals, starting with the negative, remove the battery from its housing, and install the new replacement following the reverse procedure.

Watch the video!


by ScegliAuto

More videos