Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Door Panel on a Mercedes-Benz Class B

Model: Mercedes Classe B W245, MK 1 - Years 2005-2011
Part: Door trim panel

In this guide, we will focus on removing the inner door panel of a Mercedes-Benz Class B W245. First, remove the triangular plastic cover by prying it off with a sharp tool. Then, take out the plastic support inside the handle and unscrew the screws present inside. Unscrew any screws located around the entire frame, and then pull the panel towards you to remove it. Finally, to fully extract it, remove the metal clip and disconnect the connector for the window lifter and electric mirrors.

Updated on 18 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Front Door of a Mercedes-Benz B-Class
Removing the Front Door of a Mercedes-Benz B-Class
Mercedes Classe B (2005-2011 / W245, MK 1) Today's guide will illustrate the steps to remove and replace the front door of a Mercedes-Benz B-Class. First, open the front door and begin by remo…
How to Remove the Window Switch from a Mercedes-Benz B-Class
How to Remove the Window Switch from a Mercedes-Benz B-Class
Mercedes Classe B (2005-2011 / W245, MK 1) Before starting, open the front door of your Mercedes-Benz B-Class. Begin by removing the door panel, taking out the inserts, unscrewing the fixing s…
How to Remove the Lock Module from a Mercedes-Benz B-Class
How to Remove the Lock Module from a Mercedes-Benz B-Class
Mercedes Classe B (2011-2019 / W246, MK 2) Below are the instructions to remove and replace the lock on a Mercedes-Benz B-Class. First, open the front door of the vehicle and start by removing…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos