Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel on a Mercedes ML

Model: Mercedes Classe M W164 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Door trim panel

See other generations:
Video tutorial

To remove the door panel on this vehicle, you must unscrew the screws holding it in place. Some of these are well hidden, and this guide will show you how to find them and proceed with the disassembly.

The first screw is located under the buttons next to the door release lever, while the second is found beneath the front plastic of the handle. After that, remove the plastic covering the upper casing of the door, the tweeter, to disconnect it. Now, use a lever to pry the panel away from the door to detach the clips, and then disconnect all wiring and the lever inside the door.


Updated on 19 March 2026 by ScegliAuto


Related tutorials

How to Remove the Panel of the Mercedes ML
How to Remove the Panel of the Mercedes ML
Mercedes Classe M (1997-2005 / W163) How do you remove the door panel? Here’s how to take off the front cover panel of the Mercedes ML. Remove the internal handle cover, unscrew the scre…
Removing the Window Switch Panel on a Mercedes M-Class
Removing the Window Switch Panel on a Mercedes M-Class
Mercedes Classe M (2005-2011 / W164) How to remove the window switch panel located in the door trim of a Mercedes M-Class? Before starting the disassembly, disconnect the battery termina…
How to Replace the Window Switch on a Mercedes M-Class
How to Replace the Window Switch on a Mercedes M-Class
Mercedes Classe M (2005-2011 / W164) To replace the window switch on a Mercedes M-Class, you need to fully detach the door panel from its housing. To remove it, loosen the screws that se…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos