Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Panel on a Mercedes E-Class

Model: Mercedes Classe E W211 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Door trim panel

See other generations:
Video tutorial

Remove the door trim panel on the E-Class? Follow this guide to take off the panel. Use a trim tool to pry off the plastic cover under the door handle, then use a screwdriver to remove the screws underneath it. Detach the cover on the left side of the panel (unscrew the screws).

Disconnect the internal plastic of the mirror. Once all screws are removed, unclip the plastic clips that secure the door.

Remove the door panel by hand, disconnect the power connectors and the door release cable. Install the new door trim panel.


Updated on 21 March 2026 by ScegliAuto


Related tutorials

How to Remove the Dashboard in the Mercedes E-Class?
How to Remove the Dashboard in the Mercedes E-Class?
Mercedes Classe E (2002-2009 / W211) .. To remove the dashboard in the Mercedes E-Class, you need to detach the trim that runs along the entire dashboard. Once this is removed, you can.. …
How to Remove the Instrument Cluster of the Mercedes E-Class Dashboard
How to Remove the Instrument Cluster of the Mercedes E-Class Dashboard
Mercedes Classe E (2016-2023 / W213) .. replace the instrument cluster of the Mercedes E-Class dashboard. First, get inside the cabin and start by removing the plastic cover located at the top.. …
How to disassemble the window switch panel of the Mercedes E-Class
How to disassemble the window switch panel of the Mercedes E-Class
Mercedes Classe E (2016-2023 / W213) .. the window lift switch panel of the Mercedes E-Class. First, open the front door of the vehicle and start prying on the plastic cover that surrounds.. …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos