Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Steering Wheel on a Mercedes C-Class

Model: Mercedes Classe C W204 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Steering wheel

See other generations:
Video tutorial

Replacing the steering wheel on a Mercedes C-Class? Let's look at removing the airbag and the steering wheel. Insert a screwdriver into the side slots (back) of the steering wheel and disengage the clips that secure the airbag.

Once the airbag is released, remove it from above the steering wheel (disconnect the electrical connector). Use a socket wrench to remove the bolt on the steering wheel, then pull the wheel off the steering column.

For reassembly, insert the steering wheel onto the steering column and tighten the securing bolt. Connect the power connector to the airbag and press it in with your hands until it locks onto the steering wheel.


Updated on 27 March 2026 by ScegliAuto


Related tutorials

How to Remove the Steering Wheel from a Mercedes-Benz C-Class
How to Remove the Steering Wheel from a Mercedes-Benz C-Class
Mercedes Classe C (2007-2013 / W204) .. the steering wheel from a Mercedes-Benz C-Class W204 model is a fairly simple and quick task to perform on your own. To carry out this operation,.. …
How to Replace the Steering Wheel on a Mercedes C-Class?
How to Replace the Steering Wheel on a Mercedes C-Class?
Mercedes Classe C (2014-2021 / W205) .. To replace the steering wheel on a Mercedes C-Class, loosen the screws located on the back of the steering wheel. This will allow you to remove the.. …
Removing the Steering Wheel of the Mercedes C-Class
Removing the Steering Wheel of the Mercedes C-Class
Mercedes Classe C (1993-2000 / W202) .. and replace the steering wheel of the Mercedes C-Class, following the instructions below. First, get inside the vehicle and start by removing the steering.. …

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos