Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Rear Door Panel on Mercedes E-Class

Model: Mercedes Classe E W212 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Door trim panel

See other generations:
Video tutorial

In this video tutorial, you will learn how to remove the rear door panel from a Mercedes E-Class. First, gather plastic prying tools and remove the plastic cover next to the switch panel, as shown in the video.

Then, remove the switch panel by prying and lifting it, disconnecting the electrical connector. Now, unscrew the Torx screws located beneath the previously removed piece, and then you can start detaching the panel by prying on the sides at multiple points.

After detaching it, disconnect the various electrical connectors and the handle cable.


Updated on 27 March 2026 by ScegliAuto


Related tutorials

Disassembly of the rear door panel of the Mercedes E-Class
Disassembly of the rear door panel of the Mercedes E-Class
Mercedes Classe E (2009-2016 / W212) .. the rear door panel of the Mercedes E-Class. First, we open the rear door of the car and start removing the plastic covers to access the panel.. …
How to Remove the Rear Door Panel of the Mercedes E-Class?
How to Remove the Rear Door Panel of the Mercedes E-Class?
Mercedes Classe E (2002-2009 / W211) .. To remove the rear door panel of the Mercedes E-Class, loosen all the screws that secure it to its housing: the screws are located on the right side.. …
Removing the Rear Door Panel
Removing the Rear Door Panel
Mercedes Classe E (1995-2002 / W210) .. to remove the rear door panel of your Mercedes E-Class. First, you need to remove a few screws, with their positions shown. Then, use a flat tool to pry.. …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos