Do it yourself
Frequently asked questions about cars and motorcycles

Removing the Rear Door Panel

Model: Mercedes Classe E W210 - Years 1995-2002
Part: Door trim panel

The video demonstrates the steps needed to remove the rear door panel of your Mercedes E-Class. First, you need to remove a few screws, with their positions shown. Then, use a flat tool to pry around the panel, remove the upper seal, and the panel can be easily taken off. After removing the panel, if you want to access the interior of the door, you will need to remove the additional last cover. The vehicle on which this operation is performed is the W210 model.

Updated on 2 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Mercedes Classe E (2009-2016 / W212) Below we will see the instructions that will allow us to disassemble the rear door panel of the Mercedes E-Class. First, we open the rear door of the…
Mercedes Classe E (2009-2016 / W212) How to disassemble the rear door panel on a Mercedes E-Class? Let's see how to proceed in this video. Before starting the disassembly, disconnect the…
Mercedes Classe E (1995-2002 / W210) Today, follow these simple and quick steps to remove the front door panel of the Mercedes E-Class W210. First, open the front door and start removing…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos