Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Door Panel of the Mercedes E-Class?

Model: Mercedes Classe E W211 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Door trim panel

See other generations:
Video tutorial

To remove the rear door panel of the Mercedes E-Class, loosen all the screws that secure it to its housing: the screws are located on the right side near the actuator, under the inner handle, near the window switch, and at the bottom of the panel. Once all these screws are removed, detach the door panel from its housing, also disconnecting the underlying connector; at this point, you can insert the new panel, securing it with the screws and reconnecting all the connectors.


Updated on 3 September 2026 by ScegliAuto


Related tutorials

Disassembly of the rear door panel of the Mercedes E-Class
Disassembly of the rear door panel of the Mercedes E-Class
Mercedes Classe E (2009-2016 / W212) .. the rear door panel of the Mercedes E-Class. First, we open the rear door of the car and start removing the plastic covers to access the panel.. …
Removing the Door Panel of the Mercedes E-Class W210
Removing the Door Panel of the Mercedes E-Class W210
Mercedes Classe E (1995-2002 / W210) .. to remove the front door panel of the Mercedes E-Class W210. First, open the front door and start removing the plastic caps on the panel to access the.. …
Removing the Rear Door Panel
Removing the Rear Door Panel
Mercedes Classe E (1995-2002 / W210) .. to remove the rear door panel of your Mercedes E-Class. First, you need to remove a few screws, with their positions shown. Then, use a flat tool to pry.. …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos