Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Panel on a Mercedes C-Class

Model: Mercedes Classe C W204 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Door trim panel

See other generations:
Video tutorial

Let's see how to remove the rear door panel of a Mercedes C-Class. Remove the screws located in the handle (the screws are found under the inner handle).

Once the screws are removed, detach the retaining clips of the panel. Use a plastic pry tool to remove the door cover panel and disconnect it from the body (unplug the power harness and the release cable).

Disconnect the electrical wires and the release cable before removing the cover panel. Access the inside of the door or replace the panel with a new one.


Updated on 30 March 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Door Panel of a Mercedes C-Class?
How to Remove the Rear Door Panel of a Mercedes C-Class?
Mercedes Classe C (2007-2013 / W204) .. you begin, open the rear door of your Mercedes C-Class. Start by unscrewing and removing all the screws securing the rear door panel. Once you have unscrewed.. …
How to Remove the Rear Door Panel of a Mercedes C-Class
How to Remove the Rear Door Panel of a Mercedes C-Class
Mercedes Classe C (2007-2013 / W204) .. can start, open the rear door of your Mercedes C-Class. Begin by unscrewing and removing all the screws that secure the rear door panel to the door itself... …
How to Remove the Door Panel of the Mercedes C-Class?
How to Remove the Door Panel of the Mercedes C-Class?
Mercedes Classe C (2007-2013 / W204) .. To remove the door panel of the Mercedes C-Class, start by removing the triangular trim at the top of the panel near the outside rearview mirror... …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos