Do it yourself
Frequently asked questions about cars and motorcycles

Removing Cup Holder from Mercedes ML

Model: Mercedes Classe M W163 - Years 1997-2005

Today, you will see the main steps to remove the front cup holder, located to the left of the steering wheel, from a Mercedes ML. First, get inside the car: then, using a screwdriver, remove the screw found inside to unclip the cup holder; next, lever the sides to unclip the lower part and the remaining piece, which will come away with the spring underneath. Now refit the new cup holder by applying the reverse procedure of removal: follow the video to the end!

Updated on 31 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Mercedes Classe M (2005-2011 / W164) How to replace the remote key battery of the Mercedes M-Class? Follow this detailed guide. Take your remote key, extract the metal key; use a lever b…
Mercedes Classe M (2005-2011 / W164) Are the front headlight bulbs blown and need replacing? Here’s how to replace the bulbs on a Mercedes ML. Lift the front engine cover, locate the wor…
Mercedes Classe M (1997-2005 / W163) This brief tutorial shows how to change one of the two lights illuminating the rear number plate of a Mercedes Class M. Once you have identified the …

Other guides you may be interested in

How to reset the tire pressure sensor of the Hyundai Tucson

Below we will discover the instructions that will allow us to reset the tire pressure warning light (TPMS) of the Hyundai Tucson. First of all, we get into the car and turn on the instrument panel; then we go to the vehicle settings until we reach the tire pressure monitor, identifying the tire with the incorrect pressure. At this point, we proceed to restore all tire pressures, following the pattern indicated on the label; in this way the TPMS system will be reset and the warning light will be reset by the instrument panel!

Watch the video!


by ScegliAuto

More videos