Do it yourself
Frequently asked questions about cars and motorcycles

Replace Fuses in Mercedes C 230

Model: Mercedes Classe C W203 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Fuse box

See other generations:
Video tutorial

How do you replace the fuses in a C-Class? Open the door and check the fuse removal. Use a plastic trim tool to remove the cover in the glove compartment located on the dashboard side.

Then, use needle-nose pliers to pull out the damaged fuses from the compartment. Once this is done, insert the new fuses into the designated slots in the compartment.

Close the fuse box inspection cover with the trim cap. Finally, test the proper operation of the vehicle by turning on the ignition with the key. You can find the other fuses in the engine compartment.


Updated on 2 April 2026 by ScegliAuto


Related tutorials

Mercedes Classe C (2007-2013 / W204) The fuse box in a Mercedes C-Class is located in the trunk. To access it, open the trunk and remove the cover or access panel on the right side of th…
Mercedes Classe C (2014-2021 / W205) Hello, today you will locate and access the fuse box of your Mercedes C-Class. First, open the door on the right side of the driver. After opening it…
Mercedes Classe C (2014-2021 / W205) The goal is to find out where the fuse box is located and how to access it in your Mercedes C-Class. In the attached video, you can see the fuse diag…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

Where is the battery located on the Aprilia Scarabeo 250ie scooter?

This video shows where the battery is located on the Aprilia Scarabeo 250ie scooter and how to proceed if you need to replace it. As shown, it is located beneath the seat. To access and replace it, first open the seat, then remove the plastic cover by unscrewing the relevant screws with a cross-head screwdriver. Next, disconnect both terminals, starting with the negative, remove the battery from its housing, and install the new replacement following the reverse procedure.

Watch the video!


by ScegliAuto

More videos