Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Radio from a Mercedes Sprinter

Model: Mercedes Sprinter MK 2, W906 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Car stereo

See other generations:
Video tutorial

Do you want to replace the radio mounted in the dashboard of the Mercedes Sprinter? Here’s how to remove it from inside the dashboard. Remove the stereo trim using a plastic lever (the air vents are on the sides): unclip the trim from above the centre console.

Once the radio is free from various plastics, unscrew the securing screws located on either side. Extract the stereo by hand and disconnect the cables (power and antenna).

To reassemble, follow the disassembly steps in reverse. Turn on and test the radio's operation.


Updated on 5 April 2026 by ScegliAuto


Related tutorials

Where to find the radio fuse on a Mercedes Sprinter
Where to find the radio fuse on a Mercedes Sprinter
Mercedes Sprinter (2006-2018 / MK 2, W906) The radio fuse for the Mercedes Sprinter is not located with the others in the designated boxes within the cabin or in the engine bay. It is located …
How to set the time on the Mercedes Sprinter
How to set the time on the Mercedes Sprinter
Mercedes Sprinter (2006-2018 / MK 2, W906) Did changing the battery make changes to the time on the radio and display of the Mercedes Sprinter? Don't panic, you won't need to go back to the wo…
How to Remove the Factory Radio from the Mercedes Sprinter
How to Remove the Factory Radio from the Mercedes Sprinter
Mercedes Sprinter (2006-2018 / MK 2, W906) This video shows how to remove the factory radio from the Mercedes Sprinter van. Removing this radio makes space for most aftermarket double DIN ster…

Other guides you may be interested in

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos