Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Factory Radio from the Mercedes Sprinter

Model: Mercedes Sprinter MK 2, W906 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Car stereo

See other generations:
Video tutorial

This video shows how to remove the factory radio from the Mercedes Sprinter van. Removing this radio makes space for most aftermarket double DIN stereo units. You will need a plastic trim tool and a screwdriver.

Before starting, disconnect the power to the radio, located near the footwell; simply unplug the electrical connector for safety. Now, use the trim tool to pry around the outer edge of the frame to remove the part that is held in by clips; behind it, you will find electrical connectors to disconnect.

Next, remove the four Torx screws that secure the radio unit. Take out the unit by disconnecting the electrical connectors, and you're done!


Updated on 16 September 2026 by ScegliAuto


Related tutorials

How to Reset the Radio on a Mercedes Sprinter
How to Reset the Radio on a Mercedes Sprinter
Mercedes Sprinter (2006-2018 / MK 2, W906) To reset the radio on a Mercedes Sprinter, use a tool to pry off the panel surrounding the radio. Once this panel is removed, proceed to loosen the s…
How to remove the radio in the Mercedes Sprinter van?
How to remove the radio in the Mercedes Sprinter van?
Mercedes Sprinter (2006-2018 / MK 2, W906) In this tutorial, you will see how to remove the radio in the Mercedes Sprinter van, a very simple and quick operation. First, ensure the key is not …
Where to find the radio fuse on a Mercedes Sprinter
Where to find the radio fuse on a Mercedes Sprinter
Mercedes Sprinter (2006-2018 / MK 2, W906) The radio fuse for the Mercedes Sprinter is not located with the others in the designated boxes within the cabin or in the engine bay. It is located …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos