Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where to find the radio fuse on a Mercedes Sprinter

Model: Mercedes Sprinter MK 2, W906 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Fuse box

See other generations:
Video tutorial

The radio fuse for the Mercedes Sprinter is not located with the others in the designated boxes within the cabin or in the engine bay. It is located directly at the back of the radio, so to access it in case this component is not working and you want to check if a power surge has damaged it, you must remove the radio console to see where it is. First, remove the console trim, then take out the compartment found below the radio to reveal all four screws holding the radio in place.

Remove the four screws and pull out the unit.

On the left rear side, you will find the fuse. This procedure also applies to the Volkswagen Crafter.


Updated on 26 June 2026 by ScegliAuto


Related tutorials

Where to find and how to access the fuse box of a Mercedes Sprinter?
Where to find and how to access the fuse box of a Mercedes Sprinter?
Mercedes Sprinter (1995-2006 / MK 1, W901) Hello and welcome to Scegliauto.com! In this guide, you will discover where the fuse box of your Mercedes Sprinter is located. Start by getting into …
Where are the Fuses in the Mercedes Sprinter?
Where are the Fuses in the Mercedes Sprinter?
Mercedes Sprinter (2006-2018 / MK 2, W906) Any fuse in the Mercedes Sprinter is located inside one of the two fuse boxes installed in the vehicle, both of which are found within the cabin. The…
Where are the Fuses on a Mercedes Sprinter?
Where are the Fuses on a Mercedes Sprinter?
Mercedes Sprinter (2018-2026 / Br907, Br910, MK 3) Each fuse on a Mercedes Sprinter is located within one of the two fuse boxes present in the vehicle: both are located inside the cabin. The first box…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos