Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Sprinter
    4. : How to disassemble the radio in the Mercedes Sprinter van?

Mercedes Sprinter - Video tutorial

Model: Mercedes Sprinter MK 2, W906 - Years 2006-2018
Part: Car stereo
Operation: How to disassemble the radio in the Mercedes Sprinter van?

In this tutorial, we can see how to remove the radio in the Mercedes Sprinter van, an extremely simple and fast operation. First of all, make sure the key is not inserted, then unclip the radio frame using a preferably plastic spatula. Next, unscrew the two indicated screws, remove the small storage compartment, and continue by unscrewing the four radio mounting screws. At this point, we can remove the module from the housing, disconnect the rear connectors, and follow the reverse procedure to install the replacement.


Posted on 26 September 2023 by ScegliAuto



How to remove the factory radio from the Mercedes Sprinter
Mercedes Sprinter (2006-2018 / MK 2, W906) In this video we see how to remove the factory radio from the Mercedes Sprinter van. Removing this radio makes room for most aftermarket stereo main
Instructions for building a flatbed for Mercedes Sprinter
Mercedes Sprinter (2006-2018 / MK 2, W906) In this video tutorial we will see what it takes to build a platform inside the second series Mercedes Sprinter. Before proceeding with the assembly
What is the fuse diagram on the Mercedes Sprinter van?
Mercedes Sprinter (1995-2006 / W901, MK 1) If one or more devices on the Mercedes Sprinter van suddenly stop working, we can first of all check the status of the respective fuses, the diagrams

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos