Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Fuel Pump from Mercedes E-Class 320

Model: Mercedes Classe E W210 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
Part: Fuel pump

See other generations:
Video tutorial

In this video, you will see the main instructions on how to remove the fuel pump from a Mercedes E-Class 320. First, lift your vehicle with jack stands and locate the position of the pump, which is covered by a plastic shield; remove the shield and disconnect the pump hoses by unscrewing the metal clamp screws, and remove the clamps by unscrewing the nuts.

At this point, remove the bracket holding the pump and take it out: replace it with the new one by reconnecting the hoses and clamps!


Updated on 5 April 2026 by ScegliAuto


Related tutorials

Replacing the Fuel Pump on the Mercedes E-Class
Replacing the Fuel Pump on the Mercedes E-Class
Mercedes Classe E (2002-2009 / W211) In this guide, you will learn the main instructions for disassembling and replacing the fuel pump on the Mercedes E-Class. First, open the rear doors…
Replacing the Power Steering Pump on a Mercedes E320 CDI
Replacing the Power Steering Pump on a Mercedes E320 CDI
Mercedes Classe E (2009-2016 / W212) Today we will see how to remove and replace the power steering pump on a Mercedes E320 CDI. First, open the hood and remove the timing belt by loosen…
How to Replace the Fuel Pump Fuse on a Mercedes E-Class
How to Replace the Fuel Pump Fuse on a Mercedes E-Class
Mercedes Classe E (2002-2009 / W211) Today's instructions will show you how to locate and replace the fuel pump fuse on a Mercedes E-Class. First, locate the fuel pump fuse by removing t…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos