Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Power Steering Pump on a Mercedes E320 CDI

Model: Mercedes Classe E W212 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Pump

See other generations:
Video tutorial

Today we will see how to remove and replace the power steering pump on a Mercedes E320 CDI. First, open the hood and remove the timing belt by loosening the tensioner: use a socket wrench for this. Next, disconnect the hose from the power steering reservoir and remove the reservoir by unscrewing the bolts.

Underneath, access the pump, where you will unscrew the mounting bolts to remove it along with the pulley, as shown in the video. Just follow the video to the end for reassembly!


Updated on 10 April 2026 by ScegliAuto


Related tutorials

How to Remove the Fuel Injection Pump on a Mercedes E-Class 220 CDI
How to Remove the Fuel Injection Pump on a Mercedes E-Class 220 CDI
Mercedes Classe E (1995-2002 / W210) In this video, see how to remove the high-pressure fuel injection pump on a Mercedes Benz E-Class 220 CDI W210. First, open the hood of your car and …
Removing Fuel Pump from Mercedes E-Class 320
Removing Fuel Pump from Mercedes E-Class 320
Mercedes Classe E (1995-2002 / W210) In this video, you will see the main instructions on how to remove the fuel pump from a Mercedes E-Class 320. First, lift your vehicle with jack stan…
Replacing the Power Steering Pump on the Mercedes E-Class 270
Replacing the Power Steering Pump on the Mercedes E-Class 270
Mercedes Classe E (2002-2009 / W211) Today, you will see the instructions that will allow you to remove and replace the power steering pump on the Mercedes E-Class 270. First, open the h…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos