Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Slk
    4. : Air mass sensor replacement on Mercedes SLK R170

Mercedes Slk - Video tutorial

Model: Mercedes Slk R170, MK 1 - Years 1997-2004
Part: Mass air flow sensor
Operation: Air mass sensor replacement on Mercedes SLK R170

At the beginning of the video you can consult the code of the required mass air flow sensor. A small flat-head screwdriver will suffice to replace the part. Lift the hood and put on the special support rod. First, remove the air filter box: it is fixed by four simple clips (two on the air duct) that you can open by hand. With the filter box cover removed, disconnect the air duct connector. Then unscrew the screw that holds the clamp of the same and you can extract the part of the tube containing the mass air flow sensor. Assemble the new piece by working backwards.


Posted on 22 January 2024 by ScegliAuto



How to set the clock on the Mercedes SLK R170
Mercedes Slk (1997-2004 / R170, MK 1) In this video we will show you how to set the clock on the Mercedes SLK R170. Gently remove the knob located in the center of the two dials located o
Where are the fuses of the Mercedes SLK R170 located?
Mercedes Slk (1997-2004 / R170, MK 1) The Mercedes SLK has two fuse boxes: the first is located inside the passenger compartment, on the side of the dashboard, accessible only by opening
Change oil and oil filter on Mercedes SLK r170
Mercedes Slk (1997-2004 / R170, MK 1) Hello everyone! Today we will show you how to change oil on Mercedes Slk r170, knowing that for this model we recommend using a 5w-30 lubricant. Befo

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos