Do it yourself
Frequently asked questions about cars and motorcycles

Removal of panoramic roof on Mercedes E-Class W210

Model: Mercedes Classe E W211 - Years 2002-2009

Today we will see the instructions that will allow us to remove the panoramic roof on a Mercedes Benz E-Class W210. First of all, we get on board the car and start by removing the ceiling light from the passenger compartment lights; remove the plastic covers and unscrew the screws that we find below with a T25 torx key. At this point we disconnect the electrical connector and then remove the handles on the roof and the sun visors, unscrewing their fixing screws; now we leverage the sky to unhook it from the sides. We just have to remove the motor of the panoramic roof and then remove the gaskets and the fixing screws of the same!


Posted on 23 January 2024 by ScegliAuto



How do you replace the panoramic roof of the Mercedes E-Class?
Mercedes Classe E (1995-2002 / W210) In order to replace the panoramic roof of the Mercedes E-Class, it will be necessary to push it upwards from inside the cabin, so that the roof lifts
How do you reset the panoramic roof of the Mercedes E-Class?
Mercedes Classe E (2002-2009 / W211) To reset the panoramic roof of the Mercedes E-Class, you need to use the button located near the interior lights. Before using this button, you need
How do you reset the panoramic roof of the Mercedes E-Class?
Mercedes Classe E (2009-2016 / W212) To reset the panoramic roof on the Mercedes E-Class, you will need to use the button located near the interior light console: before pressing this bu

Other guides that may interest you

How to deactivate the safe lock on a Volkswagen Golf.

The safe lock is indeed an anti-theft system that prevents thieves from accessing the car. This device locks the doors, both externally and internally, when the driver activates the central locking remote control after leaving the vehicle. To permanently disable it, it is necessary to use a diagnostic program such as VCDS that we will connect to the vehicle through the ODBII port. Then wait for the connection and recognition of the control unit and then select the blocks present and locate the safe lock to disable it. And the job will be completed.

Watch the video!


by ScegliAuto

More videos