Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Mercedes A-Class W176

Model: Mercedes Classe A W176 - Years 2012-2018
Part: Service warning light

In today's video, you will see the steps to reset the service light for routine maintenance of the oil change on a Mercedes A-Class W176. First, get in the vehicle and turn the key to the first position; then press and hold the phone button on the steering wheel while simultaneously holding the "ok" button for three seconds. At this point, you will enter the "assyst plus" menu until you reach general maintenance; then confirm and execute the reset of the service light!

Updated on 12 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on Mercedes A-Class W176
How to Reset the Service Light on Mercedes A-Class W176
Mercedes Classe A (2012-2018 / W176) .. routine oil change maintenance on a Mercedes A-Class W176. First, get inside the vehicle and turn on the ignition; then press the call button and the.. …
How to Reset the Service Light on a Mercedes-Benz A-Class
How to Reset the Service Light on a Mercedes-Benz A-Class
Mercedes Classe A (2012-2018 / W176) How to reset the service light on a Mercedes-Benz A-Class? Follow the video. Enter the cabin, turn on the ignition (you will see the maintenance ligh…
Instructions to Reset Service Light for Mercedes A-Class W176
Instructions to Reset Service Light for Mercedes A-Class W176
Mercedes Classe A (2012-2018 / W176) .. routine maintenance oil change of a Mercedes A-Class W176. First, get inside the car and turn on the ignition: then press the call button and the OK.. …

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos