Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Rear light bulb replacement

Model: Mercedes Classe C W203 - Years 2000-2007
Part: Rear light bulb

To access the rear brake light bulb, open the luggage compartment and the carpeted flap located just behind the light from where the bulb holder (fixed with a butterfly screw) can be extracted. At this point, replace the damaged bulb (it will be blackened) with a new one (incandescent bulb with bayonet coupling) and reassemble the bulb holder, fixing it with the relative screw. Carry out a functional check: if the new light bulb has a much higher luminous intensity than that of the other light, replace the other light bulb as well, proceeding in the same way.


Posted on 15 July 2023 by ScegliAuto



Rear brake bulb replacement
Mercedes Classe C (2000-2007 / W203) To replace the rear brake light bulb it is not necessary to disassemble the light but just open the luggage compartment, move the carpet covering in
Rear light brake bulb replacement
Mercedes Classe C (2007-2013 / W204) Replacing the rear light brake bulb is very easy to do as you don't have to disassemble anything; therefore open the rear hood and remove the cover f
How to replace the headlight bulb of a Mercedes C-Class
Mercedes Classe C (2007-2013 / W204) Before we can start, we will have to go to open the front hood of our Mercedes C-Class. So let's start by unscrewing and removing the rear cover of t

Other guides that may interest you

How do you reset the tire pressure light on the Toyota Aygo X?

To reset the tire pressure warning light on the Toyota Aygo X, you need to inflate the tires until they reach the recommended pressure value: this will be indicated on the sticker attached to the driver's side door pillar. Once the tires are inflated, you can go inside the cabin and turn on the instrument panel: after it has been turned on, you can open the glove box on the passenger side and locate the SET button that must be held down to turn off the warning light.

Watch the video!


by ScegliAuto

More videos