Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe C
    4. : Rear brake bulb replacement

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W203 - Years 2000-2007
Part: Rear light bulb
Operation: Rear brake bulb replacement

To replace the rear brake light bulb it is not necessary to disassemble the light but just open the luggage compartment, move the carpet covering in correspondence with the light, remove the light holder by releasing the safety in the center (it is a plastic butterfly screw) and replace the bulb (bayonet coupling: press and rotate); once the new bulb has been fitted, carry out a functional check by pressing the brake pedal and, once you are sure that the bulb is on, proceed in reverse for reassembly. Carry out the same operations on the other headlight to change the other bulb as well.


Posted on 18 August 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos