Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Door Panel on BMW E-Class

Model: Mercedes Classe E W211 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Door trim panel

See other generations:
Video tutorial

Remove the plastic trim at the handle height and unscrew the underlying T15 Torx screws. Using a plastic wedge, remove the window switch and disconnect it. Still using the wedge, remove the round covers under the armrest and unscrew the now exposed T10 screws.

With a lever or plastic wedge, pry around the entire edge of the panel until you can pull it out of its seat. Disconnect all internal wires (speakers, lock cable, etc.) and you're done.

For reassembly, simply reverse the steps.


Updated on 15 April 2026 by ScegliAuto


Related tutorials

How to Remove the Door Panel of the Mercedes E-Class
How to Remove the Door Panel of the Mercedes E-Class
Mercedes Classe E (2009-2016 / W212) .. how to remove the door panel of a Mercedes E-Class model W 212. To remove the door panel, open the front door that needs disassembly. Using a flathead.. …
How to Remove the Door Panel on a Mercedes E-Class
How to Remove the Door Panel on a Mercedes E-Class
Mercedes Classe E (2002-2009 / W211) .. Replace the door panel on your Mercedes E-Class if it is irreparably damaged and cannot be repaired. Use a plastic trim tool to pry off the cover.. …
How to Remove the Right Front Door Panel on a Mercedes E-Class
How to Remove the Right Front Door Panel on a Mercedes E-Class
Mercedes Classe E (2009-2016 / W212) .. the right front door panel on a Mercedes E-Class: disconnect the battery terminals located in the engine compartment, use a screwdriver to unscrew.. …

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos