Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Door Panel on a Mercedes E-Class

Model: Mercedes Classe E W211 - Years 2002-2009
Part: Door trim panel

Replace the door panel on your Mercedes E-Class if it is irreparably damaged and cannot be repaired. Use a plastic trim tool to pry off the cover under the handle. Remove the screws in the panel with a screwdriver. Remove the remaining screws on the door panel (near the lock) and detach the screw covers above it. Pull the panel off by hand and disconnect it from the door (unplug the power harness and the opening cable). Perform the desired maintenance inside the door. Install the new panel onto the door and secure it with the cover screws on top of the panel and inside.

Updated on 17 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Mercedes Classe E (2009-2016 / W212) .. disassemble the rear door panel on a Mercedes E-Class? Let's see how to proceed in this video. Before starting the disassembly, disconnect the battery.. …
Mercedes Classe E (2002-2009 / W211) .. To remove the rear door panel of the Mercedes E-Class, loosen all the screws that secure it to its housing: the screws are located on the right side.. …
Mercedes Classe E (2009-2016 / W212) .. the right front door panel on a Mercedes E-Class: disconnect the battery terminals located in the engine compartment, use a screwdriver to unscrew.. …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos