Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Reset the Service Light on Mercedes GLK

Model: Mercedes Glk MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Service warning light

Video tutorial

Insert the vehicle's ignition key and turn it to position 1, where the instrument cluster lights up but the engine does not need to be running. Now, using the arrow buttons on your left, on the steering wheel, select the "trip" section as shown in the video, press the phone button and the "ok" button, then hold both until the reset message appears (this takes just a few seconds).

Get out and click on "assyst plus" with the "ok" button, then click on the second option (it should say something like "full service"), finally select the relevant service and reset it.


Updated on 19 April 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Mercedes GLK
How to Reset the Service Light on a Mercedes GLK
Mercedes Glk (2008-2015 / MK 1) Here are the step-by-step instructions on how to reset the service light for the routine maintenance oil change on a Mercedes GLK. First, get in the …
Reset on Mercedes Glk
Reset on Mercedes Glk
Mercedes Glk (2008-2015 / MK 1) How to reset the maintenance warning light on a Glk? Let's see how to reset the light. Turn on the car's instrument panel, using the button next to t…
How to Reset the Service Light in a Mercedes GLK
How to Reset the Service Light in a Mercedes GLK
Mercedes Glk (2008-2015 / MK 1) To reset the service light in a Mercedes-Benz GLK, insert the key and turn the ignition to position one without starting the engine. Use the controls…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos