Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe S
    4. : Location and fuse table on Mercedes S-Class

Mercedes Classe S - Video tutorial

Model: Mercedes Classe S W222, MK 6 - Years 2013-2020
Part: Fuse box
Operation: Location and fuse table on Mercedes S-Class

On Mercedes S-Class the first fuse compartment is located inside the passenger compartment and more precisely on the left side of the dashboard, then on the driver's side, which can be accessed easily only by opening the driver's door. Another fuse box is located on the front passenger side, more precisely under the glove box. The third but not least is instead located under the hood, on the driver's side. We have arrived at the last one, since on this model of car there are 4 fuse compartments: the last one is in the trunk, this time on the right side of the vehicle.


Posted on 23 February 2024 by ScegliAuto



Schematic and fuse box on a Mercedes S-Class
Mercedes Classe S (2013-2020 / W222, MK 6) .. schemes of a sixth generation Mercedes S-Class, produced from 2013 until 2020. This vehicle model has four fuse boxes, the first of these It is..
Where are the fuse boxes of the Mercedes S-Class located
Mercedes Classe S (1999-2005 / MK 4, W220) .. The fuse box of the Mercedes S-Class is located in the cheek of the dashboard, in contact with the passenger door. Another is located..
Where is the fuel pump relay located in the Mercedes S-Class?
Mercedes Classe S (2005-2013 / MK 5, W221) .. In case the fuel pump of the Mercedes S-Class suddenly stopped working, and we suspect the failure of the respective relay, we can find its location..

Other guides that may interest you

    Frequently Asked Questions

    • Classe S 2005-2013 - Where is the fuel pump relay on the Mercedes S-Class W221 located? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos