Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe C
    4. : How to remove the headrest of the Mercedes Benz W203

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W203 - Years 2000-2007
Part: Seat
Operation: How to remove the headrest of the Mercedes Benz W203

The guide shows you how to replace the Mercedes Benz W203 headrest. The disassembly of the piece is slightly complicated, but with a split screwdriver it is possible to complete the operation. Practicing can be started by removing the plastic cover next to the headrest to be replaced. With the screwdriver it is possible to leverage the pawl that has been put on display in order to disconnect the headrest block and finally it is possible to remove it from its seat. Reassembly is carried out by inserting the guides of the headrest into the holes and locking it in place. Check for correct positioning.


Posted on 4 March 2024 by ScegliAuto

    Frequently Asked Questions

    • Classe C 2000-2007 - How to unlock rear seats on Mercedes C180? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos