Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cabin Fan on the Mercedes E-Class W212

Model: Mercedes Classe E W212 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Blower motor

See other generations:
Video tutorial

In this video tutorial, you will learn how to disassemble and replace the cabin fan on the Mercedes E-Class W212, following the instructions below. First, get inside the vehicle and remove the lower panel located on the passenger side; then disconnect the electrical connectors of the fan, as shown in the video.

At this point, rotate the fan to unscrew and remove it from its housing; disconnect the last electrical wires to take it out and replace it with the new one, following the video until the end for reassembly!


Updated on 26 April 2026 by ScegliAuto


Related tutorials

Disassembly and Replacement of the Cabin Fan on a Mercedes E-Class
Disassembly and Replacement of the Cabin Fan on a Mercedes E-Class
Mercedes Classe E (2009-2016 / W212) Today's instructions will show you how to disassemble and replace the cabin fan on a Mercedes E-Class. First, get inside the cabin and remove the pla…
Where to Find the OBD Port on a Mercedes E-Class W212
Where to Find the OBD Port on a Mercedes E-Class W212
Mercedes Classe E (2009-2016 / W212) .. The OBD port on your Mercedes E-Class W212 is located inside the cabin. In this guide, we will describe the steps you need to take to.. …
How to Remove the Cabin Air Fan on a Mercedes E-Class
How to Remove the Cabin Air Fan on a Mercedes E-Class
Mercedes Classe E (2009-2016 / W212) How to remove the cabin air fan on a Mercedes E-Class. In this video, see how to perform the disassembly. Use a lever to remove the plastic cover und…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos